Company - Products/Systems - FITRE SISTEMI - Markets - Events - Site map

Building Block Typical Diagram

• ASTROLess (with no ASTRO server required) is the application of ASTRO server manager used for managing the communication functions in small systems (up to 20 VoIP nodes), using network IP technology implemented in each VoIP node.

• Based on the standard SIP and FastPA multicasting technology, the system offers high voice quality (16kHz audio band) with very simple installation and very easy-to-use operation.

• Programming of each VoIP node using the PC's web browser.

• Echo and noise cancellation management in each VoIP station.

• Full configurable voice matrix and priority configuration between SIP and FastPA communications.

• Fully integrated Public Address & Intercom System.

• Distributed amplification performed through the use of self-amplified loudspeakers with built-in power amplifier.

• Self-amplified loudspeakers (rated power: 15W or 25W; power supply: 24‑48Vdc) fitted with continuous volume control from 0W to the max rated power and with ALC (Automatic Level Control) of the output power according to the variation of the ambient noise level.

• Extended intercom operation (omnibus page/party, selective point-to-point, group calls and conference calls limited to 3 participants), with virtually up to 20 VoIP nodes (including the PA amplifiers).

• Paging zone calls (including single zones, any combination of zones and all zones).

• Alarm tones and/or prerecorded messages zone broadcasts (including single zones, any combination of zones and all zones), with manual activation from the access panels.

• Public Address / Intercom stations fitted with double full-duplex conversation mode: with handset or hands-free (without handset).

• Possibility to utilize as Public Address / Intercom stations any type of Fitre IP telephone sets (indoor, weatherproof and explosion-proof, including cordless/DECT).

• Main Public Address / Intercom stations (access panels) VoIP based, fitted with handset and keypad. If required, also equipped with gooseneck microphone and additional 40 buttons (up to 48 in total) keypad for direct activations.

• Very cheap and cost-effective cables network (LAN network to interconnect all IP Public Address / Intercom stations and two standard telephone pairs for each loudspeaker).

• All Fitre VoIP terminals (Public Address / Intercom stations and access panels) can be connected with a maximum allowed distance of 250 meters from the relevant LAN switch (instead of 100 meters as per usual standard).

• System architecture allowing, in case of fault of a field device (Public Address / Intercom stations, speakers and beacons), the complete operation of all other field devices even in case of multiple fault events.

• I/O card in each VoIP node (e.g. for managing an external contact to activate an external visual beacon in each station, an automatic direct call and/or a local CCTV camera).

Building Blocks System Concept > > AstroLess Public Address & Intercom with VoIP Intercom Stations

the main Building Blocks types

Public Address with Centralized Amplification Features and typical diagram Public Address with Analog Distributed Amplification Features and typical diagram Public Address with VoIP Distributed Amplification Features and typical diagram Intercom with Analog Intercom Stations Features and typical diagram Intercom with VoIP Intercom Stations Features and typical diagram New IF2000 Public Address & Intercom with Analog Intercom Stations Features and typical diagram Page & Talk with VoIP Intercom Stations and ReteMatic™ Technology Features and typical diagram AstroLess Public Address & Intercom with VoIP Intercom Stations Features and typical diagram Emergency Telephony with VoIP Emergency Call Points Features and typical diagram Emergency Telephony with Self-Powered Emergency Telephones Features and typical diagram